TOYOTA GR86

Stand out from the crowd the right way. Perfected proportions. Cleaner intent. Presence you feel before you see.

Engineered for Presence and Performance

Sharpened lines. Widened stance.

Transform your GR86/BRZ front end with a facelift designed to look wider and lower. A lower visual line and more sculpted corner architecture shift the emphasis outward and down for a sharper, more planted silhouette. The front tip is extended outward and set closer to the ground, and with the optional carbon fiber front lip, the lower edge extends approximately 1.5 inches closer to the ground for a noticeably more serious stance than stock. The outer corners of the bumper are also pushed outward to create a wider, more assertive fascia.

CFD tested. Minimal drag increase.

Developed using Computational Fluid Dynamics (CFD), our front bumper & lip package delivers measurable gains in downforce and stability with only minimal drag increase. The result is a GR86/BRZ that feels more planted and inspires confidence on both street and track.

Integrated air curtains help guide airflow from the front of the bumper toward the front wheel arches, supporting cleaner airflow where it matters. It’s very subtle from the outside, but built into the design with intent.

Built like OEM

Injection molded. Consistent by design.

Designed with precision, the GR86/BRZ Facelift Front Bumper delivers predictable fitment, clean panel alignment, and a smooth surface ready for paint. The result is a front end that looks intentional, not added on.

Crafted from injection molded polypropylene, our Facelift Front Bumper uses the same type of OEM grade thermoplastic widely chosen for modern bumper applications, including Toyota platforms. It balances impact resilience with long term stability, resisting cracking and staying stable through heat cycles and daily driving conditions. Compared to more brittle composite constructions (including FRP), it’s better suited for everyday road contact and less prone to visible damage. Injection molding translates that advantage into consistent geometry, meaning fitment and surface quality stay uniform across every production run.

Mounts like OEM

Fits like it belongs there.

ADRO’s Facelift Front Bumper uses OEM mounting locations and installs on factory attachment points with no cutting or drilling required, keeping the process clean, efficient, and straightforward. To complete the look, professional paintwork is recommended for a finish that matches the factory standard.

License plate ready.

For vehicles that require a front license plate, a custom license plate frame is included to fit cleanly on the facelift front bumper.

Optional eyelids included.

Optional headlight eyelids are included for drivers who want a more aggressive look. They install with double sided tape and can be removed later for a reversible change.

Stand out from the crowd the right way. Perfected proportions. Cleaner intent. Presence you feel before you see.

Engineered for Presence and Performance

Sharpened lines. Widened stance.

Transform your GR86/BRZ front end with a facelift designed to look wider and lower. A lower visual line and more sculpted corner architecture shift the emphasis outward and down for a sharper, more planted silhouette. The front tip is extended outward and set closer to the ground, and with the optional carbon fiber front lip, the lower edge extends approximately 1.5 inches closer to the ground for a noticeably more serious stance than stock. The outer corners of the bumper are also pushed outward to create a wider, more assertive fascia.

CFD tested. Minimal drag increase.

Developed using Computational Fluid Dynamics (CFD), our front bumper & lip package delivers measurable gains in downforce and stability with only minimal drag increase. The result is a GR86/BRZ that feels more planted and inspires confidence on both street and track.

Integrated air curtains help guide airflow from the front of the bumper toward the front wheel arches, supporting cleaner airflow where it matters. It’s very subtle from the outside, but built into the design with intent.

Built like OEM

Injection molded. Consistent by design.

Designed with precision, the GR86/BRZ Facelift Front Bumper delivers predictable fitment, clean panel alignment, and a smooth surface ready for paint. The result is a front end that looks intentional, not added on.

Crafted from injection molded polypropylene, our Facelift Front Bumper uses the same type of OEM grade thermoplastic widely chosen for modern bumper applications, including Toyota platforms. It balances impact resilience with long term stability, resisting cracking and staying stable through heat cycles and daily driving conditions. Compared to more brittle composite constructions (including FRP), it’s better suited for everyday road contact and less prone to visible damage. Injection molding translates that advantage into consistent geometry, meaning fitment and surface quality stay uniform across every production run.

Mounts like OEM

Fits like it belongs there.

ADRO’s Facelift Front Bumper uses OEM mounting locations and installs on factory attachment points with no cutting or drilling required, keeping the process clean, efficient, and straightforward. To complete the look, professional paintwork is recommended for a finish that matches the factory standard.

License plate ready.

For vehicles that require a front license plate, a custom license plate frame is included to fit cleanly on the facelift front bumper.

Optional eyelids included.

Optional headlight eyelids are included for drivers who want a more aggressive look. They install with double sided tape and can be removed later for a reversible change.

Complete the transformation of your GR86 with the ADRO Carbon Fiber Front Lip, designed exclusively for the ADRO GR86 Facelift Bumper. Crafted from premium lightweight carbon fiber, this lip enhances the aggressive lines of the facelift bumper while delivering functional aerodynamic performance. The result is a lower, more planted stance with increased front-end stability and striking track-inspired style.

Key Features:

• Exclusive fitment for the ADRO GR86 Facelift Bumper

• Premium carbon fiber construction with a gloss finish

• Enhances aerodynamics and generates additional front-end downforce

• Seamless integration with the facelift design for a factory-plus look

Add some track-inspired design to your GR86 with the ADRO side skirt kit. These side skirts are made from 100% real carbon fiber and are designed to not only flow with the rest of the carbon fiber kit for this platform, but with the factory body lines as well. These side skirts are lightweight and engineered to have a fit and finish that's just like OEM.

TOYOTA GR86 AT-M3 MOTORSPORT WING

Take your GR86 to the next level of performance and presence with the ADRO AT-M3 Motorsport Wing. Designed for maximum aerodynamic efficiency, this track-inspired wing doesn’t just add aggressive styling, it delivers measurable downforce and stability you can feel at speed.

Key Features:

Motorsport-Inspired Design: Engineered for high-performance driving and functional aerodynamic gains.

Lightweight Prepreg Carbon Fiber Construction: Durable, rigid, and built for racing without excess weight.

8 Degrees of Adjustability: Fine-tune your wing angle to optimize balance for street, track days, or competitive racing.

Proven Aerodynamics: Generates 229.46 lbs (105.05 kg / 1020.68 N) of downforce at 180 km/h (112 mph) for real stability when it matters most.

Wide 1650mm Span: Enhances rear-end grip and cornering performance with a broad, aggressive stance.

Race-Ready Aesthetics: Transforms the GR86 with a bold, competition-inspired rear profile.

Precision Fitment: Designed exclusively for the Toyota GR86 for seamless installation.

The AT-M3 Motorsport Wing strikes the perfect balance between form and function delivering the aerodynamic stability and confidence you need on the circuit, while giving your GR86 an uncompromising race-bred look on the street.

Our Formula 1 history shows its colors in our swan neck wing. With a design that’s 45% lighter than an aluminum variant of the same composition, the purpose-built wing cuts through the air with less resistance than a typical wing design due to the upright engineering.

Prepreg carbon fiber ensures that the weight savings is maximized while the kit additionally offers over 250 pounds of aerodynamic downforce at 110 miles per hour.

Transform your AT-R1 Swan Neck Wing into a full RS-look with ADRO's new flat endplates. 

This product only includes the flat endplates and does not include the mainplate, aluminum brackets, or a trunk bracket, and is only compatible with the AT-R1 Swan Neck Wing from ADRO. 

AT-R1 Swan Neck Wings are available for the BMW F8X M3/M4, BMW F87 M2, Toyota GR86, Subaru BRZ, and Hyundai Elantra N.

PODIUM Line Product Overview

Introducing the revolutionary JQ Werks Madtrace® PODIUM Line Racing Steering Wheel System for the TOYOTA/SUBARU GR86/BRZ chassis, engineered to take your racing experience to the next level with unmatched response, seamless factory integration, and complete driver control. As the first system in the industry to combine both CAN bus and LIN bus technologies in a single hub, it ensures flawless communication with your factory electronics. No splicing, no wiring headaches, just true plug and play functionality. Designed for simplicity and performance, the PODIUM Line delivers a fully wireless experience that eliminates clutter while keeping your cockpit clean and efficient.

PODIUM Line Materials

Built from 6061-T6 billet aluminum and precision machined with 5-axis CNC technology, the PODIUM Line system delivers a perfect fit and premium feel. Finished in sleek black anodizing, it pairs seamlessly with our matching adapter hub and quick release, both made from the same 6061-T6 aluminum for exceptional strength, durability, and reliability. Built to perform. Made to last.

PODIUM Line CAN Bus Integration Feature

This feature is exclusive to the PODIUM and FORMULA Line, providing the driver with access to over 40 additional functions (chassis dependent) beyond the factory steering wheel functions. Drivers can operate high beam flash, wipers, turn signals, shift lights, TC adjustment, and much more, all from a single, fully integrated system. It’s the ultimate all in one solution, keeping every critical function right at your fingertips.

PODIUM Line MadtraceLAB 1.0 Feature

The PODIUM Line delivers complete control with a fully customizable button layout, configured through MadtraceLAB or the optional DID. Every update, adjustment, and upgrade can be managed directly through MadtraceLAB, keeping the system always up to date. A discreet USB‑C port future proofs the hub, enabling seamless updates, feature expansions all in one advanced, integrated platform.

PODIUM Line Multi Profile Settings Feature with Button Layout Mapping Configuration

A key highlight of the PODIUM Line system is its Profile Settings and Button Layout Mapping. Whether you’re dialing in for changing track conditions, personal driving preferences, or even swapping the system between cars, you can store up to three fully customizable profiles directly in the hub’s internal memory for instant recall. With access to over 20 OEM CAN bus functions, every command can be mapped seamlessly across the eight front facing buttons and dual joystick knobs, putting complete control at your fingertips.

(Example: Profile One For G87 M2 might include M1, M2, Cruise Control SET/RES, Bluetooth, and Cluster Menu, all with white backlighting. Profile Two For GT4RS might include Front Axle Lift, ESP+TC OFF, Turn Signal, Wiper, PDK SPORT, and PSE, all in red.)

PODIUM Line Button Profile Switch Functionality

To give drivers quick adaptability, they designed the Layout Switch Function. With a simple press of a discreet rear mounted switch, you can instantly swap between your saved button maps and LED profiles on the fly. 

(Example, Layout One can be changed to Layout Two with a single press of the button.)

PODIUM Line RevLEDs CAN bus Shift Light

The PODIUM Line system comes exclusively with RevLEDs CAN bus shift lights, providing the driver with an instant, zero delay shifting and track experience. All the lights flash red when the engine reaches redline.

PODIUM Line Optional OLED Driver Information Display (DID)

Every PODIUM Line system comes with a standard horn cap. For those who want more functionality, they’ve designed an optional OLED Driver Information Display (DID) that simply replaces the standard horn cap. This display allows the driver to see telemetry data such as real time speed thanks to our integrated CAN bus support. Our DID system also enables on the fly button layout mapping and profile switching, eliminating the need to connect the hub to a computer for MadtraceLAB programming. Additionally, the DID lets the driver adjust both display brightness and RGB customizable button colors for a fully personalized experience.

PODIUM Line Optional Dual-Paddle Functionality

For the first time ever in a racing steering wheel system designed for OEM vehicles, they’ve engineered a motorsport grade dual paddle setup made from 6061-T6 billet aluminum, giving drivers more control than ever before. All four paddles are fully programmable, allowing users to assign any function they need, not just shifting.

This system also supports manual transmission vehicles, so even MT drivers can take advantage of customizable paddle functions.

(Example: Upper paddles can be set to control turn signals, while the lower paddles handle gear shifting.)

IMPORTANT NOTES:

Please be aware that the JQ Werks Madtrace® Racing Steering Wheel System is ONLY DESIGNED FOR OFF-ROAD, TRACK USE, RACING, AND COMPETITION PURPOSES, NOT FOR ANY TYPE OF STREET USE. Consequently, we cannot guarantee that the JQ Werks Madtrace® Racing Steering Wheel System complies with local government laws and regulations regarding required vehicle safety equipment. Moreover, it is strictly prohibited to install this system on any motor vehicle subject to state safety inspection. 

It is of utmost importance to understand that this racing steering wheel is solid, which could result in bodily injury in the event of a car accident. For this reason, removing the factory airbag poses a significant safety risk and should never be attempted while utilizing factory 3-point seat belts. Instead, we strongly require our customers to use 6-point racing harnesses with racing roll-bar for off-road use to ensure their safety.

Please note that these considerations may vary depending on the country or region you operate in. It's always best to consult with legal professionals who are familiar with the laws and regulations in your specific area and industry to ensure you are fully compliant with all relevant legal requirements.

CLUBSPORT Line Product Overview

Experience the next evolution in driving with the JQ Werks Madtrace® CLUBSPORT Line Racing Steering Wheel System. Engineered to deliver the ultimate motorsport feel without compromise, the CLUBSPORT Line retains every factory steering wheel function while transforming your cockpit into a true race ready environment. Thanks to our seamlessly integrated LIN bus technology, installation is effortless, no cutting, no splicing, no hassle. Simply plug in and enjoy a fully wireless, plug and play solution built for both precision and performance.

CLUBSPORT Line Materials

Built from 6061-T6 billet aluminum and lightweight 5mm solid carbon fiber, the CLUBSPORT Line system delivers a perfect fit and racing feel. it pairs seamlessly with our matching adapter hub and quick release, both made from the same 6061-T6 aluminum for exceptional strength, durability, and reliability. Built to perform. Made to last.

CLUBSPORT Line MadtraceLAB 1.0 Feature

The PODIUM Line delivers complete control with a fully customizable button layout, configured through MadtraceLAB. Every update, adjustment, and upgrade can be managed directly through MadtraceLAB, keeping the system always up to date. A discreet USB‑C port future proofs the hub, enabling seamless updates, feature expansions all in one advanced, integrated platform.

PODIUM Line Product Overview

Introducing the revolutionary JQ Werks Madtrace® PODIUM Line Racing Steering Wheel System for the TOYOTA/SUBARU GR86/BRZ Chassis, engineered to take your racing experience to the next level with unmatched response, seamless factory integration, and complete driver control. As the first system in the industry to combine both CAN bus and LIN bus technologies in a single hub, it ensures flawless communication with your factory electronics. No splicing, no wiring headaches, just true plug and play functionality. Designed for simplicity and performance, the PODIUM Line delivers a fully wireless experience that eliminates clutter while keeping your cockpit clean and efficient.

Every PODIUM or CLUBSPORT Line racing steering wheel system from JQ Werks can be equipped with the optional OLED Driver Information Display, positioned directly beneath the RevLED shift lights. With integrated CAN bus support, the display can show telemetry data such as real time vehicle speed.

The OLED Driver Information Display replaces the standard horn button cap and adds on the fly button layout mapping and profile switching, so drivers can make changes without connecting the hub to a computer for MadtraceLAB programming. It also allows adjustment of display brightness and RGB customizable button colors for a more personalized setup.

With the JQ Werks Madtrace 6061-T billet aluminum 6x74mm steering wheel adapter, you can easily fit any steering wheel with a 6x74mm bolt pattern (ex: Nardi steering wheels). Simply remove the four T10 screws and take off the original horn cap. Replace it with the new horn cap, then install the ring using the provided hardware.

Comes in a 6061-T hard anodized billet aluminum housing to match with the racing steering wheel hub.

The Madtrace 6061 T billet aluminum MOMO Horn Cap Adapter is made for the Madtrace steering wheel hub system, allowing most MOMO size horn caps to mount properly.

To install, open the factory MOMO horn cap, remove the spring and top piece, and transfer them into the adapter. Ensure the spring contacts both copper rings, reinstall the back cover, then fasten the assembly onto the hub.

CSF has over 5 decades of experience manufacturing radiators. So when it comes to keeping your engine cool and your FRS/BRZ/86/GR86 running at its best, a CSF High-Performance All-Aluminum Radiator is the obvious choice. Designed to perform on the street or at the track, a performance radiator is a must-have for both high horsepower builds as well as race vehicles which need added cooling performance in motorsports environments. This radiator features a 2-Row core with CSF's exclusive B-Tube Technology: Unlike a regular oval shape "O" type radiator tube, CSF uses a specially engineered tube in the shape of a "B". These "B-tubes" are carefully formed and then brazed over the seam to seal. CSF is able to use thinner and lighter aluminum material (with better cooling efficiency) because this design is actually stronger than normal "O" shape tubes that are welded. The design (inlet in the middle of the tube that is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over regular tubes - producing the efficiency of two smaller tubes vs. one large tube within the same space criteria. With "B-tubes" you are able to get "dual liquid laminar flow". CSF also uses ultra efficient multi louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in our wind-tunnel lab.

The CSF FRS/BRZ/86/GR86 radiator is a true "Drop-in fit" design requiring no modifications to install. OE style brackets are all CNC machined and welded for the best durability possible. Inlet/Outlet connections are designed to match the OE connections so you can reuse OEM hoses or aftermarket. Trust the cooling experts at CSF for the best performing, highest-quality, and most reliable radiators.

Product Features

• 2-Row 42mm Core (Dual Core) Featuring CSF's Exclusive B-Tube Technology
• Core Features an Ultra-Efficient Fin with 6.5mm Fin Height and Multi-Louvered Design for Maximum Surface Area Contact
• CNC Machined "Quick-Connect" Inlet/Outlet Connections
• CNC Machined Brackets and Fittings for Superb Fit and Durability
• All-Aluminum Race Style Drain Plug
• Smooth Satin Finish
• "Drop-in Fit" Requiring No Modifications to Install - Accepts All Attaching OEM Components Including "Quick Connect" Hoses, AC Condenser, Mounting Brackets and Fan Shroud

Replace the weak plastic auxiliary filler neck of your FRS/BRZ/86 with an all-aluminum 100% TIG-welded and mirror polished upgraded version from CSF. Complete with a 1.4bar high-pressure cap with a high-quality "mini style" radiator cap, embossed with the CSF logo. This cap style is most commonly used with high-performance aftermarket caps if you wish to replace the CSF cap with another brand. Easy drop-in replacement with no modifications - can be installed in less than 5 minutes.

Product Features

• All-aluminum 100% TIG-welded
• Mirror polished
• 1.4bar high-pressure cap
• Integrated 1/8 NPT sensor port & preinstalled optional plug for aftermarket sensors