TOYOTA GR86

Stand out from the crowd the right way. Perfected proportions. Cleaner intent. Presence you feel before you see.

Engineered for Presence and Performance

Sharpened lines. Widened stance.

Transform your GR86/BRZ front end with a facelift designed to look wider and lower. A lower visual line and more sculpted corner architecture shift the emphasis outward and down for a sharper, more planted silhouette. The front tip is extended outward and set closer to the ground, and with the optional carbon fiber front lip, the lower edge extends approximately 1.5 inches closer to the ground for a noticeably more serious stance than stock. The outer corners of the bumper are also pushed outward to create a wider, more assertive fascia.

CFD tested. Minimal drag increase.

Developed using Computational Fluid Dynamics (CFD), our front bumper & lip package delivers measurable gains in downforce and stability with only minimal drag increase. The result is a GR86/BRZ that feels more planted and inspires confidence on both street and track.

Integrated air curtains help guide airflow from the front of the bumper toward the front wheel arches, supporting cleaner airflow where it matters. It’s very subtle from the outside, but built into the design with intent.

Built like OEM

Injection molded. Consistent by design.

Designed with precision, the GR86/BRZ Facelift Front Bumper delivers predictable fitment, clean panel alignment, and a smooth surface ready for paint. The result is a front end that looks intentional, not added on.

Crafted from injection molded polypropylene, our Facelift Front Bumper uses the same type of OEM grade thermoplastic widely chosen for modern bumper applications, including Toyota platforms. It balances impact resilience with long term stability, resisting cracking and staying stable through heat cycles and daily driving conditions. Compared to more brittle composite constructions (including FRP), it’s better suited for everyday road contact and less prone to visible damage. Injection molding translates that advantage into consistent geometry, meaning fitment and surface quality stay uniform across every production run.

Mounts like OEM

Fits like it belongs there.

ADRO’s Facelift Front Bumper uses OEM mounting locations and installs on factory attachment points with no cutting or drilling required, keeping the process clean, efficient, and straightforward. To complete the look, professional paintwork is recommended for a finish that matches the factory standard.

License plate ready.

For vehicles that require a front license plate, a custom license plate frame is included to fit cleanly on the facelift front bumper.

Optional eyelids included.

Optional headlight eyelids are included for drivers who want a more aggressive look. They install with double sided tape and can be removed later for a reversible change.

Optional side intake mesh included.

Optional side intake meshes are included for drivers who want open vents instead of closed-off panels.

Stand out from the crowd the right way. Perfected proportions. Cleaner intent. Presence you feel before you see.

Engineered for Presence and Performance

Sharpened lines. Widened stance.

Transform your GR86/BRZ front end with a facelift designed to look wider and lower. A lower visual line and more sculpted corner architecture shift the emphasis outward and down for a sharper, more planted silhouette. The front tip is extended outward and set closer to the ground, and with the optional carbon fiber front lip, the lower edge extends approximately 1.5 inches closer to the ground for a noticeably more serious stance than stock. The outer corners of the bumper are also pushed outward to create a wider, more assertive fascia.

CFD tested. Minimal drag increase.

Developed using Computational Fluid Dynamics (CFD), our front bumper & lip package delivers measurable gains in downforce and stability with only minimal drag increase. The result is a GR86/BRZ that feels more planted and inspires confidence on both street and track.

Integrated air curtains help guide airflow from the front of the bumper toward the front wheel arches, supporting cleaner airflow where it matters. It’s very subtle from the outside, but built into the design with intent.

Built like OEM

Injection molded. Consistent by design.

Designed with precision, the GR86/BRZ Facelift Front Bumper delivers predictable fitment, clean panel alignment, and a smooth surface ready for paint. The result is a front end that looks intentional, not added on.

Crafted from injection molded polypropylene, our Facelift Front Bumper uses the same type of OEM grade thermoplastic widely chosen for modern bumper applications, including Toyota platforms. It balances impact resilience with long term stability, resisting cracking and staying stable through heat cycles and daily driving conditions. Compared to more brittle composite constructions (including FRP), it’s better suited for everyday road contact and less prone to visible damage. Injection molding translates that advantage into consistent geometry, meaning fitment and surface quality stay uniform across every production run.

Mounts like OEM

Fits like it belongs there.

ADRO’s Facelift Front Bumper uses OEM mounting locations and installs on factory attachment points with no cutting or drilling required, keeping the process clean, efficient, and straightforward. To complete the look, professional paintwork is recommended for a finish that matches the factory standard.

License plate ready.

For vehicles that require a front license plate, a custom license plate frame is included to fit cleanly on the facelift front bumper.

Optional eyelids included.

Optional headlight eyelids are included for drivers who want a more aggressive look. They install with double sided tape and can be removed later for a reversible change.

Optional side intake mesh included.

Optional side intake meshes are included for drivers who want open vents instead of closed-off panels.

Complete the transformation of your GR86 with the ADRO Carbon Fiber Front Lip, designed exclusively for the ADRO GR86 Facelift Bumper. Crafted from premium lightweight carbon fiber, this lip enhances the aggressive lines of the facelift bumper while delivering functional aerodynamic performance. The result is a lower, more planted stance with increased front-end stability and striking track-inspired style.

Key Features:

• Exclusive fitment for the ADRO GR86 Facelift Bumper

• Premium carbon fiber construction with a gloss finish

• Enhances aerodynamics and generates additional front-end downforce

• Seamless integration with the facelift design for a factory-plus look

Add some track-inspired design to your GR86 with the ADRO side skirt kit. These side skirts are made from 100% real carbon fiber and are designed to not only flow with the rest of the carbon fiber kit for this platform, but with the factory body lines as well. These side skirts are lightweight and engineered to have a fit and finish that's just like OEM.

TOYOTA GR86 AT-M3 MOTORSPORT WING

Take your GR86 to the next level of performance and presence with the ADRO AT-M3 Motorsport Wing. Designed for maximum aerodynamic efficiency, this track-inspired wing doesn’t just add aggressive styling, it delivers measurable downforce and stability you can feel at speed.

Key Features:

Motorsport-Inspired Design: Engineered for high-performance driving and functional aerodynamic gains.

Lightweight Prepreg Carbon Fiber Construction: Durable, rigid, and built for racing without excess weight.

8 Degrees of Adjustability: Fine-tune your wing angle to optimize balance for street, track days, or competitive racing.

Proven Aerodynamics: Generates 229.46 lbs (105.05 kg / 1020.68 N) of downforce at 180 km/h (112 mph) for real stability when it matters most.

Wide 1650mm Span: Enhances rear-end grip and cornering performance with a broad, aggressive stance.

Race-Ready Aesthetics: Transforms the GR86 with a bold, competition-inspired rear profile.

Precision Fitment: Designed exclusively for the Toyota GR86 for seamless installation.

The AT-M3 Motorsport Wing strikes the perfect balance between form and function delivering the aerodynamic stability and confidence you need on the circuit, while giving your GR86 an uncompromising race-bred look on the street.

Our Formula 1 history shows its colors in our swan neck wing. With a design that’s 45% lighter than an aluminum variant of the same composition, the purpose-built wing cuts through the air with less resistance than a typical wing design due to the upright engineering.

Prepreg carbon fiber ensures that the weight savings is maximized while the kit additionally offers over 250 pounds of aerodynamic downforce at 110 miles per hour.

Transform your AT-R1 Swan Neck Wing into a full RS-look with ADRO's new flat endplates. 

This product only includes the flat endplates and does not include the mainplate, aluminum brackets, or a trunk bracket, and is only compatible with the AT-R1 Swan Neck Wing from ADRO. 

AT-R1 Swan Neck Wings are available for the BMW F8X M3/M4, BMW F87 M2, Toyota GR86, Subaru BRZ, and Hyundai Elantra N.